Showing all 4 results

Show sidebar

DoAll C-305A Automatic Bandsaw, New 2000. 12″x12″

Rectangular Capacity: 12 x 12 in
Round Capacity: 12 in
Recommended Smallest Diameter: 1/2 in
Single Automatic Index Length: 16 in
Minimum Butt End with Auto Feed: 5 in
Drive Speed: 60 to 350 fpm (Infinitely Variable Band)
Material Pass Line Height: 30.5 in
Blade Size: 1 1/4 x 144 in
Wheel Diameter: 15 in
Motor Drive Power: 5 hp
Hydraulic Motor Power: 2 hp
Coolant Pump Motor Power: 1/10 hp
Floor Space: 8 ft x 6 ft 6 in x 5 ft
Weight: 4200 lb
Voltage: 440 V
Phase: 3
Frequency Cycle: 60 Hz
$9,000.00

DoAll C4100A 14″ x 16″ Automatic High Production Horizontal Band Saw

DoAll C4100A 14″ x 16″ Automatic High Production Horizontal Band Saw

Brand: DoAll
Model: C4100A
Serial #: 513-94105
Year: 1994
Approx. Shipping Weight: 7,000 Lbs.
Approx. Shipping Dimensions: 116″ L x 84″ W x 72″ H

Specifications:

Cutting Capacity Rectangular: 14″ x 16″
Cutting Capacity Round: 16″
Index Stroke: 1/4″ – 24″
Maximum Multi Cycle Length: 192″
Blade Speed: 40 – 360 FPM
Blade Size: 180″ x 1-1/2″
Blade Motor HP: 10
Electrical: 220V/3PH

Equipped With:

Coolant System, Rapid Approach Control, Band Break Switch, Variable Vise Pressure Control, Digital Band Speed Readout, Powered Chip Conveyor, Split Vise Control.

Machine can be seen under power. FOB Louisville KY 40209.

Kasto Kastotec A5 Programmable Cut Off Saw New 2007

KASTO MODEL KASTOTEC A5 PROGRAMMABLE CUT-OFF SAW
NEW 2007, ONLY 7772 HOURS.

Technical data
KASTOtec A 5
Cutting range
Form
Cutting range 530 x 630 mm / 530 x 530 mm / 530 mm

Cutting range bundle H x W (option)530 x 630 mm
Clamping range 0 – 630 mm

Smallest dimension to be cut 10 x 10 mm
Shortest length of residual piece, single cut 10 mm
Shortest remnant length in automatic operation, possible (only if the material has a perfect geometric surface)35 mm
Shortest cut-off length 6 mm
Mass and height Length 2.225 mm
Width with chip conveyor approx.5.215 mm
Height (saw frame in lowest position) approx.2.415 mm
Height (saw frame in highest position) approx.2.680 mm
Total weight 5.500 kg
Material support height 700 mm
Performance characteristics
Connected load 9,5 kW
Power of saw motor 5,5 kW
Power at running wheel 5,23 kW
Cutting speed infinitely variable 12 – 120 m/min Material feed length – individual feed 600 mm Multiple feed 9.999 mm
Clamping force of machine vice 2.000 – 10.000 N Clamping force of feed vice 2.000 – 20.000 N Saw blade dimensions 7.675 x 54 x 1,3 mm Saw blade dimensions option I 7.675 x 54 x 1,6 mm
Saw blade dimensions option II 7.675 x 67 x 1,6 mm

Fully hydraulic and automatic high-performance bandsawing machine of robust construction, with saw blade moving parallel in horizontal direction, for cutting of round, square and flat material, of tubes and profiles of all qualities, particularly for tool steels and material which is difficult to cut such as titanium, Hastelloy, Inconel etc.

  • Sawband guide via hydraulically pretensioned carbide slideways
  • Electronic monitoring of the hydraulic blade tension
  • Infinitely variable cutting speed, to be adjusted at central control panel
  • Fully automatic, rapid height adjustment of the saw unit via light barrier
  • Hydraulic horizontal vices, clearance stroke is standard

AUTO FEED

CHIP CONVEYOR

$51,950.00

Marvel Series 8 Mark II 18″ x 22″ Vertical Band Saw

MARVEL MODEL 8-MARK-II VERTICAL BAND SAW

SERIAL …………………….. 826219-W

MODEL ……………………… 8 MARK II

CAPACITY …………………… 22″ X 18″

CAPACITY AT 45 DEGREES ………. 18″ X 12-3/4″

AREA OF TABLE ………………. 33″ X 24″

BLADE SPEEDS (VARIABLE) ……… 50 TO 450 FPM

FEEDS ……………………… 0 TO 140 LBS.

BLADE SIZE …………………. 14’6″ X 1″ X .035″

HEAD TILT LEFT & RIGHT ………. 45 DEGREES

COOLANT ……………………. YES

BLADE GUIDES ……………….. UPPER & LOWER ROLLER TYPE

TABLE VISE …………………. YES

MOTOR ……………………… 2 HORSEPOWER

*May inspect under power.

*Performs as expected.

*Came from operating shop.

*Free Loading

$11,000.00