Mori Seiki MT-253S/1500 with Sub-Spindle, Live Tooling, 60 tool ATC

Mori Seiki model MT-253S/1500 with Sub-Spindle, Live Tooling,

60 tool ATC, Max turning length 60.2”, hydraulic chucks, with

Mori conversational control model MSG-501, chip conveyor,

Donaldson-Torit mist filtration system, and transformer. New

2001. With the following specifications:

CAPACITY

Swing over bed/cover …………………………………….. 31.5”

Swing over cross slide…………………………………….. 16.54” – 33.86”

Maximum turning diameter…………………………….. 22.44”

Maximum distance between centers………………. 71.97”

Maximum turning length………………………………… 60.24”

Bar work capacity…………………………………………… 2.87”

TRAVEL

X axis travel……………………………………………………. 25”

Y axis travel……………………………………………………. +/-4.33”

Z axis travel ………………………………………………….. 62.8”

B axis travel ………………………………………………….. -120,+105

SPINDLE 1

Spindle 1 speed range ………………………………….. 35-3500

No. of spindle 1 speed ranges………………………. 2

Specifications, (continued)

Type of Spindle nose…………………………………….. A2-8

Through Spindle 1 hole diam……………………………… 3.38”

Minimum spindle indexing angle………………………… .001”

SPINDLE 2

Spindle 2 speed range………………………………………. 50-4000

No. of Spindle 2 speed ranges……………………………. 2

Type of spindle 2 nose………………………………………. A2-6

Through spindle 2 hole diam……………………………… 2.87”

Minimum spindle 2 indexing angle……………………. .001”

ROTARY TOOL SPINDLE

Number of tools on turret………………………………….. 1

Minimum B-axis indexing accuracy…………………… .001”

Tool speed spindle range…………………………………… 12,000

Taper of rotary tool spindle……………………………… KM63

Inner diam. of rotary tool…………………………………. 3.14”

No. of tools in automatic changer…………………….. 60

Max. tool diam. (with adjacent tools)…………… 3.14”

Max. tool diam. (w/o adjacent tools)……………….. 4.92

Maximum tool length……………………………………….. 15.74”

Maximum tool weight………………………………………. 17.6 lbs.

TAILSTOCK

Tailstock spindle diam………………………………………… 4.33”

Spindle taper………………………………………………………. MT5

Spindle travel……………………………………………………… 5.91”

FEEDRATE

Rapid Traverse Rate X axis……………………………….. 944.88”

Rapid Traverse Rate Z axis………………………………… 1181.1”

MOTORS (HP)

Spindle 1 drive motor (30 min/cont.)…………… 24.79/20

Spindle 2 drive motor (30 min/cont.)……………. 15/10

Live tool spindle drive motor……………………………… 15/10

Hydraulic pump motor……………………………………….. 3

Coolant pump motor………………………………………….. 1.5

TANK CAPACITY (gallons)

Hydraulic oil tank……………………………………………….. 7.92

Auto lube tank…………………………………………………….. 1.5

Coolant tank………………………………………………………… 71.28

MACHINE SIZE

Machine Height……………………………………………………. 129.72”

Floor space………………………………………………………….. 209” x 120”

Machine Weight…………………………………………………… 35,200

Included with machine: All operational, programming,

maintenance, parts, hydraulic chuck, electrical manuals

(approximately 16).

Available for inspection under power

Category: