Epilog Fusion Pro 48 50 watt Fiber Laser W/Rotary attchment

This is not a Co2 Machine. Fiber Only
Fusion Pro 48
Work Area 48" x 36"
(1219 x 914 mm)
Maximum Z-Depth 12.25" (311 mm)
Fiber 50 watts
Fiber &
Included Table - Task Plate Engraving Table
Air Assist Pump Included
Status Light n/a
Software Epilog Laser Software Suite: Laser Dashboard™ & Epilog Job Manager™
Memory Multiple files up to 1 GB. Engrave any file size.
Operating Modes Optimized Raster, Vector, and Combined modes
Motion Control High-speed, continuous-loop, brushless DC servo motors using rotary encoding technology for precise positioning
X-Axis Bearings Ground & polished stainless steel, Teflon-coated, self-lubricating bearings. Dual blocks on X-axis for greater rigidity
Belts Advanced B-style double-wide Kevlar precision drive belts.
Resolution Fully-flexible and user-controlled from 75 – 1200 dpi
Speed and Power 165 IPS (4.2m/s) with 5G acceleration. Computer-controlled in .001 increments up to 100%. Color mapping feature links Speed, Power, Frequency, and Raster/Vector mode.
Print Interface Wireless, Ethernet, and USB. Windows 7/8/10/11 compatible
Size (W x D x H) 70.6" x 51.3" x 42.75"
1794 x 1304 x 1086 mm
Pedestal removed: 34" H (863 mm)
Weight 650 lbs (295 kg)
Electrical 240 volts, 60 Hz, single phase
Ventilation Three total ports. Two upper exhaust ports, one lower vacuum table port. Total 735 CFM required. All ports 4" (102mm).
Safety Class 2 Laser Product – 1 mW CW Maximum 600 – 700 nm