Angle Sizes Max. Angle Size 6 x 6 x 5/8″ (150 x 150 x 15mm) Min. Angle Size 1-1/2 x 1-1/2 x 1/8″ (40 x 40 x 4mm) Flat Bar Sizes Max. Flat Bar Size 6 x 5/8″ (150 x 15mm) Min Flat Bar Size 2 x 1/4″ (50 x 6mm) Punch – Slots, Holes, Shapes etc. Punching Tonnage 75 Tons US (68 Metric Tons) Max. Punch Size 1-1/4″ Diameter – Standard (270) 26mm Diameter – Metric (PFP #3) Punch Cycle Time 2 seconds Min. Gauges (Using 272 punches, 271 dies) 11/16″ plus leg thickness for 1 1/2″ x 1 1/2″ through 2″ x 2″ angle 1 3/16″ plus leg thickness for 2 1/2″ x 2 1/2″ angle 1 1/4″ plus leg thickness for 3″ through 6″ angle sizes Min. Gauges (Using PFP#3 punches and dies) 15mm (.59″) plus leg thickness for 40mm x 40mm (1 1/2″ x 1 1/2″) through 50mm x 50mm (2″ x 2″) angle sizes 24mm (.94″) plus leg thickness for anything over 50mm x 50mm (2″ x 2″) through 150mm x 150mm (6″ x 6″) angle sizes. Shear – Cut to Length Shear Tonnage 100 Tons US (91 Metric Tons) Min. Remnant 9″ (230mm) Shear Cycle Time 5 seconds Slug Size 1/2″ (12.7mm) Measurement In-Feed Speed (X Axis) 61 FPM (18.5 meters/min.) max. General Machine Pass Line 45″ (1143mm) Weight Main Assembly with Consolet – 8,500 lbs (3,860 kg) Crate with Safety Stands & Transformer – 930 lbs (420 kg) Power Unit – 1,100 lbs (500 kg) Infeed Conveyor Stands – 360 lbs (163 kg) each 10′ (3m) section Power Requirements 480V-60 Hz or 400V-50 Hz Shop Air 90 PSIG, 10 SCFM for machines with Unist option 90 PSIG, 50 SCFM for machines with Signoscript option None for machines without above options Foundation 6″ (100mm) concrete