Filters
CNC HORIZONTALS (5)
CNC LATHES (23)
CNC VERTICALS (8)
GRINDERS (1)
MISCELLANEOUS (3)
ROBOTICS (1)
SAWING (1)
Bridge Crane (1)
CNC Lathes (12)
Engine Lathes (2)
Flame Cutters (2)
Flangers (1)
Forklift (1)
Gap Lathes (1)
More…
AMADA (1)
BATTENFELD (1)
BETTS (1)
BRIDGEPORT (1)
BULLARD (2)
CHEVALIER (1)
CINCINNATI HYPRO (1)
CLAUSING (1)
CLAUSING ATLAS (1)
CONCO (1)
DMG MORI (1)
DOOSAN (2)
More…
Sort By
Good running machine, can be seen under power.
41.0in
X
20.0in
Y
22.0in
Z
--
Power
.jpg)
Pandjiris 8'x8' Manipulator, Travel Car, Miller XMT 350CC/CV Mig Welder and Coolmate 3
Welding ManipulatorsUsed - Excellent
Excellent condition Pandjiris Manipulator, ready to go to work.
8.0ft
Vertical Height of Column
8.0ft
Length of Boom
.jpg)
Good running tank turning roll, mounted on mobile cart. Turning rolls can be moved on the frame for different size rolls. One drive roll and one idler roll.
Fanuc Robodrill Alpha T21IEL, 4 Axis VMC, 10k RPM, Chip Conveyor
Drilling & Tapping CentersUsed - Good
Good running machine, several available. Can be seen under power.
27.5in
X
15.7in
Y
12.9in
Z
7.3hp
Power
2000 FANUC ROBODRILL A-T14IB VMC, 4TH & 5TH AXIS Interface, 10K RPM,Chip Conveyor.
Drilling & Tapping CentersStock #: Lot 40
Used - Good
Good running machine, can be seen under power.
20.0in
X
15.0in
Y
12.0in
Z
7.5hp
Power
2004 FANUC ROBODRILL AT14ID VMC, 14-POSITION ATC,10K RPM
Drilling & Tapping CentersStock #: Lot 39
Used - Good
Good running machine, can be seen under power.
19.6in
X
15.7in
Y
12.9in
Z
10.0hp
Power
2004 FANUC ROBODRILL A-T21ID 4-AXIS VMC, FANUC 16IMB, 4TH & 5TH AXIS Interface
Drilling & Tapping CentersStock #: Lot 38
Used - Good
$21,950.00 USD
Good running machine, can be seen under power.
20.0in
X
15.0in
Y
13.0in
Z
--
Power
2006 FANUC ROBODRILL A-T21IE VMC,4th Axis DDR,10K RPM
Drilling & Tapping CentersStock #: Lot 37
Used - Good
2006 FANUC ROBODRILL A-T21IE VERTICAL MACHINING CENTER, 21-POSITION ATC, 10,000 RPM BIG PLUS BT30 SPINDLE, HYDRAULIC CLAMPING, AUTO DOOR, 4TH AXIS FANUC DDR, FILTERED HIGH PRESSURE COOLANT, HYDRAUL...
500.0mm
X
400.0mm
Y
330.0mm
Z
--
Power
3.5in
Angle (L1)
3.5in
Angle (L2)
0.375in
Angle (T)
--
Pipe Capacity
Giddings & Lewis PC-50 CNC TABLE TYPE HORIZONTAL BORING MILL
Horizontal Table Type Boring MillsUsed - Good
Very well maintained machine from large aerospace and defense contractor.
5.2in
Spindle Size
98.4in
X-Horiz Tvl of Table
82.7in
Y-Vert Tvl of Head
30.0hp
Power
19.7" x 19.7" pallet Okuma MA-500HB Space Center 3-Axis CNC Horizontal Machining Center (2005)
27.56in
X
35.43in
Y
30.71in
Z
20.0hp
Power
Verson 12 'x 3/4" Plate Shear, under power, good running machine.
Power Squaring Shears (Inch)Used - Good
Good running machine, can be seen under power.
34.0in
Max Thickness
12.0ft
Length of Blade
Hyd
Hyd/Mech
48.0in
Back Gauge
Good running machine, will not be released until mid August 2022.
This turning center is in exceptional condition and ready to go to work.
550.0mm
Swing
300.0mm
Machining Length
--
# Axis
6.0in
Chuck Size
This well maintained Okuma is fully functional and ready to go to work. Can be seen under power, being sold to upgrade to a 5 axis machine.
22.0in
X
24.0in
Y
22.0in
Z
20.0hp
Power
2018 Hurco VM10I Vertical Machining Center, Only 300 hours, Like new. Probe, Chip Conveyor
Vertical Machining CentersUsed - Excellent
This mill is in exceptional condition, purchased new in December of 2020 this was originally a demo machine for Hurco. The machine has only 331 cutting hours on the spindle. Can be seen under power.
26.0in
X
16.0in
Y
20.0in
Z
15.0hp
Power
2019 Okuma LB4000EX-II/750-MYBB, Live Milling, Y axis, Big Bore Lathe. Only 1423 Cutting HRS!
CNC LathesUsed - Excellent
This lathe is loaded with options. Do not wait, this will not last long. Can be seen under power. Videos available.
26.38in
Swing
30.31in
Machining Length
4.0
# Axis
12.0in
Chuck Size
.jpg)
2020 Okuma LB4000EX-II/750-MYBB, Live Milling, Y axis, Big Bore Lathe. Only 1127 Cutting HRS!
CNC LathesUsed - Excellent
This lathe is loaded with options. Do not wait, this will not last long. Can be seen under power. Videos available.
26.38in
Swing
30.31in
Machining Length
4.0
# Axis
12.0in
Chuck Size
.jpg)
Hammond Rotofinish Vortex 7 Vibratory Tumbler
Polishing Machinery including BuffersUsed - Excellent
$13,499.00 USD
Excellent Condition Hammond Tumbler. Being sold as it is no longer being used. Fully functioning with no issues.
7.5hp
Power
--
RPM
Excellent working machine. Can be seen under power.
130.0in
Cut-Width
287.0in
Cut-Length
Both
Fuel (Oxy/Plasma/Both)
1.0
# Heads-Oxy
Great working slotter, machine can be loaded onto buyers truck at no charge.
--
Max Dia. Head
36.0in
Stroke
20.0hp
Power
Excellent condition Hardinge lathe, well equipped. Comes 3 Live tool holders, 5 static drill holders, 29 20C collets and various turning holders.
21.0in
Swing
15.0in
Machining Length
3.0
# Axis
8.0in
Chuck Size
2005 Doosan DMV 3016LD, 3 Axis VMC. Fanuc OiMB. Excellent condition.
Vertical Machining CentersUsed - Good
Very clean Doosan 3016 VMC, we have just installed new X Axis thrust bearings. Machine is in great mechanical shape. Can be seen under power. https://youtube.com/shorts/iYYEJN3apNs?feature=share
30.0in
X
16.0in
Y
20.0in
Z
15.0hp
Power
