Harrison Alpha 1350XS CNC Teach Lathe

Height of centres 170mm
Distance between centre 650mm
Swing over bed 350mm
Swing in gap 535mm
Gap width from faceplate 165mm
Swing over cross slide 196mm
Spindle bore 42mm
Spindle nose Camlock D1-4
Spindle centre height from floor 1061mm
Taper in nose bush No. 3 MT
Spindle speed ranges (1-366rpm) (1-1088rpm) (1-3500rpm)
Speed Motor S3-40% 7.5kW
Constant power range 86-3500 rpm
X-Axis working stroke 245mm
X-Axis Thrust (@ stall torque) 4.07kN
X-Axis Programmed rapid traverse rate (G00) 8m/min
X-Axis Manual mode traverse rate (jog) 3m/min
X-Axis CNC rapid traverse rate (jog) 2m/min
X-Axis maximum programmed feedrate 7750mm/min
Z-Axis working stroke 558mm
Z-Axis Thrust (@ stall torque) 12.29kN
Z-Axis Programmed rapid traverse rate (G00) 10m/min
Z-Axis Manual mode traverse rate (jog) 6m/min
Z-Axis CNC rapid traverse rate (jog) 2m/min
Z-Axis maximum programmed feedrate 7750mm/min
Types of thread Metric, Imperial, Diametral, Module
Width over bed ways 318mm
Width of cross slide 180mm
Cross slide travel 250mm
Tailstock quill diameter 63mm
Tailstock quill travel 140mm
Tailstock quill taper No. 4 MT
Standard electrics 400V AC + 10%/-15% 50/60Hz
Electrical supply required 12kVA