Jenfab Parts Washer 36' X 42" (3) Stage Wash,Rinse,Blow-Off with Center Probe

No expense spared on this parts washer, replacement cost exceeds $125,000.00

Stainless Steel on all wetted surfaces. Cabinet, Pipes/Plumbing/Pumps
Work Area dimensions: 36" Diameter Roll-Out Table (1500 lbs. Capacity)
Maximum Part Height 42"
Load Height: 30"

Electrical 460 Volt 3 Phase/ 60 HZ, 95 FLA, 120a Fused 200A Disconnect

Equipped With
Wash Tank 180 Gallons S.S.
5HP Stainless Steel Wash Pump 85 GPM@58 PSI
Stainless Steel Pipe and Fittings
Wash Heater 18KW
Wash Filter 8x30 SS
Stainless Steel Tray with Stainless Steel Chip Basket
Low Waster Shutoff and Auto-water fill S.S.

Rinse Tank 90 Gallon S.S.
3 HP Stainless Steel Rinse Pump 50GPM@40PSI
Stainless Steel Pipe and Fittings
Rinse Heater 9 KW
Low Water Shutoff and Auto-water fill S.S.

Blower 15 HP 3 Ph Regenerative
Blower Heater 28KW
Air Knife 1 x 42" L & 2-1/2" Into Chamber

(3) Digital Thermostat
1 Digital Over Temp Limit
PLC HMI Micrologix Touch Screen

Electrical Box Nema 12

Hydroblast Spray Wand
Air Shop Air Pressure