Standard Features
6” Diameter Contact Drum:
A dynamically balanced 6” diameter contact roll with precision
bearings. Hardness (durometer) and serration are chosen for
general deburring and finishing applications (others upon
request).
Stainless Steel Construction:
Series 2100 machines include stainless steel doors, covers,
panels, pinch roll brackets and fasteners.
Constant Passline:
Large 37” wide conveyor with 38” constant passline and a 0-5”
bed opening. Allows parts as wide as 36” and as short as 8” to
be processed.
Dual Infeed and Dual Outfeed Holddown Rolls:
Rubber covered, spring-loaded rolls aid in holding sheet metal
parts onto the conveyor as they pass through the machine.
Air Operated Disc Brakes:
Used to stop the contact roll to assure consistent abrasive belt
stoppage in approximately four seconds. This braking system
will not fade under continuous braking and has non sparking,
easily replaceable linings. The brake disc is located on the
main motor shaft for easy maintenance.
Quick Release Outboard Support:
Allows fast removal of outboard support to expedite abrasive
belt change. Abrasive belts can be changed in as little as 60
seconds.
Through-Beam Abrasive Belt Tracking:
Electronic photo-eye tracking monitors and controls abrasive
belt movement on the grinding head. Over-travel limit
switches prevent abrasive belt damage in case of mistrack.
Centralized Lube Hub:
All high speed bearings are plumbed to one centralized access
point for quick, easy lubrication.
15 Horsepower Main Drive Motor:
Abrasive head drive motor and other feed motors are precision
balanced for power and long life. Totally enclosed, fan-cooled
motors add durability.
NEMA 12 Electrical Enclosure:
A high quality, dust tight, enclosure contains the motor starters,
relays, 110 volt control circuits, main motor fusing and
electrical disconnect. All control components are U.L.
recognized.
Hour Meter:
Records the actual running time of the machine. This unit is
used by maintenance for scheduled lubrication of key
components.
Air Knife Parts Dryer:
Air blows and squeegees sheet metal parts on exit end of
machine after deburring process. Includes precision top and
bottom air knives, squeegee rolls, feed rolls, high efficiency
blower, guards and controls.
Centralized Control Panel:
Simple operator controls for machine operation. Conveyor
feed speed, abrasive belt, coolant filter and air knife dryer are
controlled at this centralized location.
Automatic Advance Paper Media Filter:
The automatic indexing coolant system cleans and re-circulates
coolant for efficient deburring and finishing. This system
comes complete with pump, controls, media paper and flow
controls to advance the media automatically when necessary.
The filter has been designed to fit directly below the machine
to minimize required floor space. This location allows better
evacuation of the coolant directly to the filtration system.
Includes casters for ease of maintenance.
Lube Hub
Air Knife Dryer
Paper Filter
4
Motorized Thickness Adjustment:
Conveyor bed setting is motor driven. Allows for changes in
thickness settings of materials being processed.
Main Motor Percentage Load Meter:
Provided on grinding head to show the exact percentage of
main motor horsepower being used during operation.
Mechanical Digital Thickness Readout:
Indicates conveyor bed position in relation to grinding belt for
accurate setup to .001”
Variable Speed Conveyor Drive:
10-30 30 fpm A/C variable frequency conveyor drive.
Infeed Stop Bar:
A sheet metal gate acts as an emergency stop for the operator
when loading the machine. The gate actuates a limit switch,
which shuts down the abrasive belt head and conveyor feed in
emergency situations.
The Model 2111-13-0 has the following specifications:
Abrasive belt size: 37” x 60”
Maximum width stock: 36”
Minimum part length: 8”
Machine opening: 0 - 5”
Feed speed: 10-30 FPM
Voltage/Phase/Frequency: 230/3/60
Approximate full load amps: 58
Motor: 15 HP, TEFC
Passline height: 38” constant
Compressed air requirements: 2 CFM @ 90 psi
Approximate shipping weight: 4,000 lbs.
We use cookies to improve your experience. Privacy Policy.