Excellent condition, can be seen under power. Ready to work. Videos available. Machine currently has only 781 Cutting hours.
Mach 500
3.05 m x 6 m [10'-0" x 20'-0"]
Precision Z- Axis
Fully programmable servo-driven Z-Axis
Dynamic XD®
Automatic taper compensation to produce 2D and 3D parts with
tight tolerances at higher speeds
Advanced beveling and 3D (5-Axis) capabilities
PASER® 4 cutting system
New industry benchmark in cutting heads
408 kg [900 lb] abrasive delivery system
FlowCUT® PC-based controller software
suite
Roll-around control
FlowXpert™ software package
HyperJet® 94i-S intensifier pump
50 hp, 6500 bar [94,000 psi]
CleanCut Material Support System
Integrated water level control
Garnet
One (1) mt [2200 lb] of premium quality garnet for improved cutting
performance and more consistent flow
WaterjetConnectTM by Flow®
Identify your system’s utilization trends for go-forward planning
Access performance data in real time from Flow’s IoT platform
View performance data from anywhere and from any device
UltraPierce™
Allows the user to automatically pierce holes in brittle and composite
materials without breakage or delamination
FlowCare Complete
Program covers 2,000 hours of pump runtime for up to two (2) years
Key consumables: 20 premium mixing tubes, 5 diamond orifices, 20
blast discs, 10 spray shields, 2 on/off valve maintenance kits, 2 bleed
down valve maintenance kits (intensifier pumps only), 2 spare pump
water filters
Program requires the customer to maintain basic water quality
requirements
Warranty extension for one additional year (warranty valid for 2 years
or 4,000 hours starting on system ship date whichever comes first)
Compass
Integrated collision sensing and tool center point contour follower
Machine Specifications
Travel:
XY-Axis travel
3.05 m x 6 m [10'-0" x 20'-0"]
Z-Axis travel: (standard)
305 mm [12 in.]
Speed Ranges
Rapid traverse maximum
17.78 m/min [700 in./min]
Accuracy
Linear straightness accuracy
Repeatability
± .0381 mm/m [± .0015 in./3 ft]
± .025 mm [± .001 in.]
Ballbar Circularity
± .0635 mm [± .0025 in.]
Acceleration .1G
Equipped with-
Ebbco MODEL #: WJF-36K-CLC-C
INDUSTRIAL WATER CHILLER ($11,xxx option)
The following will cool the hydraulics on your 50HP, 94,000 PSI Flow Intensifier Pump.
We use cookies to improve your experience. Privacy Policy.