2024 Doosan MYNX 6500/40 II CNC VMC, 12k Spindle, 50"x26"x24", 0 HOURS!!!

SPECIFICATIONS:

CAPACITY:
X axis travel 1,270 mm (50.0")
Y axis travel 670 mm (26.4")
Z axis travel 625 mm (24.6")
Table loading area 1,400 mm x 670 mm
(55.0" x 26.4")
Allowable table load 1,300 kg (2,866 lbs)
Table T-slot spacing x width (5) - 125 mm x 18H8
(5) - 4.92" x .71"

12K SPINDLE:
Spindle nose to table top 150 mm to 775 mm (5.9" to 30.5")
Big plus Spindle system BT40 Big Plus
Spindle speed 12,000 rpm
AC Spindle Motor (30 min. rating) 15.6 kW (21 hp)
Spindle Torque (30 min. rating) 165.52 nm (122 ft-lbs)
Spindle Acceleration \ Deceleration time 0 - 12k (4.9 sec) \ 12k - 0 (4.2 sec)

AUTOMATIC TOOL CHANGER:
Number of Tools 30
Tool Shank BT 40
Pull Stud (Supply Company #) 711-23
Max. Tool Dia. \ Adjacent pots are empty 80 mm \ 125 mm (3.15" \ 4.9")
Max. Tool Length 300 mm (11.8")
Max. Tool Weight 8 kg (17.6 lbs)

MOTION:
X axis rapid traverse rate 30 m/min (1,181 ipm)
Y Axis rapid traverse rate 30 m/min (1,181 ipm)
Z axis rapid traverse rate 24 m/min (945 ipm)
Cutting feed rate 1 - 12,000 mm/min (.04 - 472 ipm)
Least command increment .001 mm (.0001")
X axis feed thrust (Continuous) 2,585 lbs
Y axis feed thrust (Continuous) 2,585 lbs
Z axis feed thrust (Continuous) 5,370 lbs
Positioning accuracy X-Axis .021 mm \ .00082”
Positioning accuracy Y-Axis .013 mm \ .00051”
Positioning accuracy Z-Axis .013 mm \ .00051”
Repeatability X-Axis .010 mm \ .00039”
Repeatability Y-Axis .008 mm \ .00031”
Repeatability Z-Axis .008 mm \ .00031”

GENERAL: Note that below values represent basic machine only and will not reflect different tool changer variations,
accessories, chip conveyors or other machine features.
Machine Height 3,015 mm (118.7")
Floor Space Required (L x W) 2,674 mm x 3,350 mm (105.3" x 131.9")
Machine Weight 9,000 kg (19,850 lbs)

UTILITY:
Power required 49 kVA / 140 amps @ 220v
Voltage required - Fanuc 205-235 Volts / 3 Phase

TANK CAPACITY:
Coolant tank capacity 380 liters (100 gallons)
Lubrication tank capacity 1.4 liter (.37 gallon)
Air Required .54 mpa (80 psi) * 8.83 cfm